Polygonal Steel Poles
polygonal steel poles Product introduction Product parameter Product feature and application Product details
polygonal steel poles
Street Lamp pole, lamp post . Lamp column
Conoid ,Multi-pyramidal,Columniform,polygonal or conical
Usually Q345B/A572,minimum yield strength>=345n/mm2
Torlance of dimenstion
Design Load in Kg
300~ 1000 Kg appliced to 50cm from the to pole
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required.
Octagonal tapered column
Length of per section
Within 14m once forming without slip joint.
Height from 6m to 12m
Raw material test → Cutting →Molding or bending →Welidng (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration →Deburr→Galvanization or powder coating ,painting →Recalibration →Thread→Packages
Product feature and application
Airport, seaport, roadway, etc
We control the quality according to the flow of ISO9001-2008. Quality is employed at every stage of production to ensure the product compliance to the specifications/standards. Careful inspections are carried out by highly trained inspection engineers as per the defined procedures from raw material stage to finished product and delivery. Prototype assembly of towers is carried out in the plant.
1. Designed for various kinds of high mast poles with different heights according to the BSS729 and EN standards.
2. Material: Steel Q345
3. Hot dip galvanized ASTM A123, Welding AWS D1.1
4. Section: Taper round or polygonal poles.
5. Wind resistant velocity: 130km/h or more
6. Anti-rust primer marine coat painted or electrostatic powder coated color can be changed according to customer's requirement.
7. Mounting height: 20m, 25m, 30m, 35m
8.Thickness: 5mm,6mm,7mm, 8mm
9. Standard: ISO9001:2008
10. Application: Square, Highway Road, Stadium, etc